FIND YOUR SIZE:
PEASE NOTE: We design our gloves to be snug for best camera feel possible. This sizing chart reflects snuggly fitted gloves.
Please note, our gloves are designed to fit snuggly to give you the best camera feel without compromising on warmth. If you prefer a looser fit, please consider to go a size up.
As we learn more and more about gloves we also learn that all hands are different. Some people have long skinny fingers and slim wrists, others have wide hands with short fingers.
Our gloves wont fit all even with the right measurements from the sizing chart – but we try!
For many, the best option will be to go up a size if your measurements are in between sizes.
If you are between sizes or if your hands do not fit into the measurements on our sizing chart, we recommend prioritizing the fit for the girth measurement. The girth is the most important measurement and if the girth size on the glove is too small, you won't be able to fit the glove.
If you’re considering pairing a liner glove with your photography gloves, we recommend choosing the same size liner as photography glove. We designed our liners to be thin and fit inside of our photography gloves so we recommend your normal size in liners. There are two exceptions to this:
Exception #1: If you are at the very end of the ratio size in the sizing chart, e.g. 1 mm from being a size Large, then we advise going up a glove size if you plan to often wear the liner with the gloves.
Exception #2: If your personal preference is to wear fairly loose gloves, then you should also go up a size when adding a liner. We don't recommend this as you will compromise dexterity with loose gloves and our priority is best possible camera feel. But you know best what you like!
House tip: Make sure to choose a liner size that is snug/tight on your hand for the best Fliptech performance when wearing liners and gloves together.
FOR THE WET & WINDY DAYS
The Milford Fleece Glove and Shell is a 2-in-1 photography glove solution, keeping you warm and protected against the elements with the Polartec® Windstop® fleece and a 10K ripstop Shell.
The Milford features Flip caps on the thumb, index, and middle finger, or as we like to say “Tri-Flip-Tech”, which can be held back with an elastic strap.
When the weather turns stormy, the Shell can be pulled out from the back pocket of the fleece glove and slipped on over the top, and you can keep on charging.
Not all Winters are created equal. Named after moody & majestic Milford Sound in New Zealand, our Milford 2-in-1 glove is the solution for your mild, but stormy photography adventures.
Designed for: Mild winter.
The Milford is designed for Mild Winter conditions.
Your product will be shipped from Netherlands (EU)*.
Once your parcel has been sent you will receive an e-mail with your tracking number and tracking link. Delivery times depend on your location and service time of your national carrier.
Estimated delivery times are as follows:
Netherlands: 1-2 business days
UK & Germany: 2-5 business days
Other Europe: 1-14 business days
Rest of the World: 5-21 business days
*Please Note: Import taxes may apply if you are shopping from outside EU.
Mild day, Pow day or Arctic Winter conditions? Vallerret has you covered!
Good value and warm
Only used them for about 6 outings but really impressed, only used the fleece base layer, not had any wet or wind to test the outer shell yet.
Very comfortable gloves. They will probably go away soon for the spring and summer, plenty of trips planned for the winter so they will get some use.
Really good customer service when needed to exchange the size.
Website could give a bit more emphasis that gloves can stretch when using.
Perfect weight gloves for the Pacific Northwest, with cool / mild temps much of the year, and lots of rain. The waterproof covers are excellent.
These are exactly what I was looking for. They fit great and I just hope they last. I will be getting some heavier gloves in the future